This pier cap design is from our standard range and has moulding leading up into an apex top, with a flat spot to accommodate the pier block and a separate fluted flush base unit to continue the flow of the moulding and sit flush with your pier. This is supplied in three pieces that can be fixed together if necessary. It is made to suit two and a half brick piers and will protect them from the elements and finish off brick, stone or rendered piers perfectly.
Complimentary balls and finials and matching profile coping stones are also available. Please contact us if you need advice.
All of our products are available in a range of natural stone shades with the same texture and feel as carved stone. Everything we manufacture is to British Standard, is completely frostproof and for decorative purposes only.
Width of base 555mm
Overall width 715mm
Approx weight 164kg
Please note that our stock levels can deplete rapidly so we may need to make your stone to order; the lead times for which can vary throughout the year. Please contact us if you would like to confirm availability and lead times before placing an order.
Actual product colours may vary from colours shown on your monitor. Colours can be verified by requesting free samples from our site.